Description
Table of Contents
- Introduction to the Krix Cyclonix 15 Passive Subwoofer
- Engineered for Impact: The 15-Inch Driver
- The Power of a High-Output Passive Subwoofer
- Cabinet Design and Internal Bracing
- Technical Specifications and Performance Data
- System Integration: Amplification and Tuning
- Frequently Asked Questions
Introduction to the Krix Cyclonix 15 Passive Subwoofer
The Krix Cyclonix 15 is not just a subwoofer; it is an acoustic earthquake. Derived from the same high-performance DNA used in commercial cinemas around the globe, this subwoofer is designed to reproduce the lowest octaves with effortless authority.
In a world where many subwoofers prioritize small footprints over performance, the Krix Cyclonix 15 takes the opposite approach. It utilizes a large-volume enclosure and a high-excursion driver to move massive amounts of air. This results in a physical sensation of bass that you don’t just hear—you feel in your chest.
Engineered for Impact: The 15-Inch Driver
At the core of the Krix Cyclonix 15 is a massive 380mm (15-inch) high-excursion driver. This driver is built to withstand the rigors of high-decibel playback without losing control or clarity.
High Sensitivity and Power Handling
The driver features a 100mm (4-inch) voice coil and a ventilated magnet assembly. This engineering allows the Krix Cyclonix 15 to handle up to 700 Watts of continuous power (RMS). With a sensitivity of 96dB, it converts amplifier power into acoustic energy with incredible efficiency, reaching peaks of 121dB in typical room settings.
Precision Bass Reproduction
Low-frequency distortion is the enemy of a great cinema experience. The Krix Cyclonix 15 employs a dual-spider assembly and a rigid paper cone to ensure that the driver moves linearly, even during the most demanding action sequences.
The Power of a High-Output Passive Subwoofer
By choosing a passive design, the Krix Cyclonix 15 gives the user total control over the amplification chain. Passive subwoofers are preferred in high-end dedicated theaters because they allow the heat-generating electronics to be kept in an equipment rack, away from the speaker cabinet.
Using the Krix Cyclonix 15 with an external power amplifier and DSP (Digital Signal Processing) allows for precision room correction. You can tailor the bass response to your specific room acoustics, eliminating “boomy” spots and ensuring a flat, accurate response.
Cabinet Design and Internal Bracing
A subwoofer driver is only as good as the box it sits in. The Krix Cyclonix 15 enclosure is constructed from high-density MDF and features extensive internal bracing. This “silent” cabinet design ensures that you only hear the driver’s output, not the vibration of the wood.
The front-firing, dual-vented port system is aerodynamically designed to minimize “port chuffing.” This allows the Krix Cyclonix 15 to maintain clean, deep bass even when pushed to its physical limits.
Technical Specifications and Performance Data
The Krix Cyclonix 15 is built for those who track performance metrics.
| Parameter | Specification |
|---|---|
| Frequency Range | 25Hz – 200Hz (in-room response) |
| Amplifier Power | 200 – 1400 Watts RMS (recommended amplifier power) |
| Recommended Processing | High pass filter: 25Hz, 24dB/Octave Butterworth Limiter: 1000W (8 Ohms) |
| Inputs | High current spring terminals featuring a 5mm hole to accept up to 10AWG cable |
| Enclosure Type | Bass reflex, front vented |
| Impedance | 8 Ohms |
| Low Frequency Driver | Single 380mm (15”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly |
| Sensitivity | 96 dB SPL (2.83V / 1m) |
| Dimensions | 1015mm (H) × 550mm (W) × 270mm (D) 290mm depth with optional grille |
| Weight | 38kg (each) |
System Integration: Amplification and Tuning
For the ultimate performance, we recommend pairing the Krix Cyclonix 15 with a dedicated subwoofer amplifier capable of delivering at least 700W into 8 Ohms.
- Stacking Options: For larger rooms, multiple Krix Cyclonix 15 units can be stacked or placed in opposite corners to smooth out room modes
- Acoustically Transparent Screens: Its shallow depth (415mm) makes it ideal for placement behind a projector screen alongside Krix Series MX “Wall of Sound” systems.
Reviews
There are no reviews yet.