Description
Table of Contents
- Introduction to the Krix OWX-50 On-wall
- The Science of the Krix OWX-50 On-wall Design
- Key Performance Benefits for Home Cinema
- Technical Specifications and Dimensions
- Placement Guide: LCR vs. Surround Sound
- Why Choose the Krix OWX-50 On-wall Over In-wall Models?
- Frequently Asked Questions
Introduction to the Krix OWX-50 On-wall
The Krix OWX-50 On-wall is engineered for the enthusiast who demands a “big screen” soundstage from a compact footprint. As the slightly smaller sibling to the OWX-55, this speaker is purpose-built to provide a seamless timber-matched experience across your entire room.
Whether you are looking for a powerful front stage (LCR) for a smaller media room or high-output surround channels for a massive 9.2.4 Atmos setup, the Krix OWX-50 On-wall offers the versatility and raw power Krix is world-famous for.
The Science of the Krix OWX-50 On-wall Design
Unlike standard “lifestyle” speakers that use small drivers and thin plastic cabinets, the Krix OWX-50 On-wall utilizes a heavy-duty MDF enclosure. This design minimizes resonance and allows the drivers to operate with maximum efficiency.
High-Power Driver Configuration
The Krix OWX-50 On-wall features a high-performance 135mm (5.25”) mid-bass driver. This isn’t your average woofer; it boasts a 33mm (1.3”) voice coil designed to handle the massive transient peaks found in modern 4K Blu-ray soundtracks.
Proprietary Krix Waveguide Technology
The high frequencies are managed by a 26mm (1”) ring radiator tweeter. This is housed within a custom-engineered waveguide. By controlling the dispersion of sound, the Krix OWX-50 On-wall ensures that high-frequency energy is directed at the audience rather than reflecting off the floor or ceiling, which can muddy the sound.
Key Performance Benefits for Home Cinema
- Commercial Heritage: Krix speakers are found in over 4,000 cinemas globally; that same engineering is inside the Krix OWX-50 On-wall.
- Slim Profile: At only 142mm deep, it sits flush alongside modern thin-bezel televisions.
- High Sensitivity: With a 90dB rating, the Krix OWX-50 On-wall produces more sound per watt, meaning your AV receiver doesn’t have to work as hard.
- Timbre Matching: It is sonically identical to other Krix cinema speakers, ensuring a seamless “panning” effect as sound moves around the room.
Technical Specifications and Dimensions
The Krix OWX-50 On-wall is built to outperform its size. Below are the critical specs for your system planning:
| Parameter | Specification |
|---|---|
| Frequency Range | 60Hz – 20kHz (in-room response) |
| Power Handling | 50 – 500 Watts RMS (recommended amplifier power) |
| Sensitivity | 97dB (2.83V @ 1 metre) |
| Impedance | 4 Ohms |
| Configuration | 2-way |
| Enclosure Type | Bass reflex, front vented Cinema black with grille and bracket |
| Low Frequency Driver | Dual 165mm (6½”) paper cone drivers. 50mm (2”) voice coil wound on high powered kapton former, with ventilated spider and aluminium flux stabilisation ring for low distortion |
| High Frequency Driver | Krix patented short throw constant directivity horn, coupled to a compression driver with a 1” throat and 1¾” voice coil |
| Crossover Point | 1.9kHz |
| Input Terminals | Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable |
| Dimensions | 440mm (H) × 440mm (W) × 159mm (D) (including grille) 447mm (H) × 440mm (W) × 169mm (D) (including bracket) |
| Weight | 14.4kg (each) |
Placement Guide: LCR vs. Surround Sound
The versatility of the Krix OWX-50 On-wall makes it a “Swiss Army Knife” for home theater installers.
Using the Krix OWX-50 On-wall as LCR
In small-to-medium rooms, three Krix OWX-50 On-wall units mounted vertically behind an acoustically transparent screen or around a large TV create a formidable front soundstage. The frequency response allows for a smooth crossover to a subwoofer at 80Hz.
The Krix OWX-50 On-wall as a Surround Speaker
Because of the controlled dispersion of the waveguide, these units are incredible as side or back surrounds. They provide the “punch” necessary for action scenes that smaller satellite speakers often miss.
Why Choose the Krix OWX-50 On-wall Over In-wall Models?
While in-wall speakers are popular, they aren’t always practical. The Krix OWX-50 On-wall offers several advantages:
- No Wall Cutting: Ideal for renters or homes with masonry walls.
- Optimized Air Volume: Unlike in-wall speakers that rely on the wall cavity, the Krix OWX-50 On-wall has a tuned enclosure for consistent performance.
- Ease of Service: Should you ever need to upgrade or move, these speakers can be unhooked in seconds.
Reviews
There are no reviews yet.